MACHX 450 in a production hall

MACH SPEED, FOR THE PARTS EVERYONE ACTUALLY MAKES.

Not a smaller flagship. Something harder. MACHX is built for the midsize segment, engineered to the standard we set with NXG — up to eight kilowatts of system laser power, twenty-five minutes between builds, and a modular architecture that keeps answering as production changes.

01OVERVIEW
8kW
SYSTEM LASER POWER
25min
BUILD TO BUILD
3
BEAM PROFILES
3
TEMPERATURE REGIMES

A MILLION TIMES NOT GOOD ENOUGH

02THE STORY

01 / 03Six years ago we introduced NXG, and nobody had asked us for it. Since then it has gone into the most demanding factories in the world, and the question we still got in almost every conversation was about everything else. The parts in the middle. Too demanding for a small system, not large enough to justify the largest one.

02 / 03That is where the volume is, and it is the part of the market that has spent a decade being offered compromises. A bigger build envelope bolted onto old thinking. More lasers with less power behind each one. Productivity that convinces on a datasheet and disappears on a shop floor.

03 / 03Anyone can build a new machine. We wanted the right machine. Those are not always the same thing, and getting there took hundreds of prototypes, thousands of decisions, and a phrase our engineers said to each other about their own work for years — until there was nothing left to say it about.

Every figure on this page exists because something before it was not good enough.

A MACHINE FOR THE MANY

TOO DEMANDING FOR A SMALL SYSTEM

NOT LARGE ENOUGH FOR THE LARGEST ONE

Built for the way most of the industry actually manufactures.

POWER, SHAPED AROUND PRODUCTION

01 / 05

OPTICS DEVELOPEDWITH NIKON

NXG optics managed one kilowatt per laser. MACHX raises that to two.

  • Zoom and defocus
  • Faster zoom switching than NXG
  • Advanced galvo control
  • Optical ports for peripherals

02 / 05

TWENTY-FIVE MINUTESBETWEEN BUILDS

Preheating and cooling happen outside the process chamber, so changeover no longer blocks production.

  • Optional cylinder exchange
  • Layer-surface monitoring for automated start
  • Interfaces for automated material handling
  • Shared RECLAIM depowdering

03 / 05

THREE TEMPERATUREREGIMES

More power means more heat. Hardware that controls the thermal environment, and software that predicts what happens next.

  • 80–200 °C, 8× the cooling performance of NXG
  • 200–450 °C option planned
  • High-temperature option planned
  • PanX simulation models

04 / 05

MODULAR BYARCHITECTURE

Materials change, applications mature, volume grows. Each module is validated independently, so one unit can be replaced without taking the system out of production. Lasers and plate packages can be upgraded after purchase.

  • Laser and optics upgrades
  • Interchangeable plate packages
  • Three cooling configurations

05 / 05

SLMX

The lasers, optics, thermal architecture, software and monitoring together form the process.

  • Thermal architecture
  • Simulation and build processing
  • Optical tomography
  • Process intelligence
01 / 06
06PARTS

BUILT ON MACHX

Parts produced on the system, with real build data.

01
PART RENDER — 360° TURNTABLE — 1:1
V8 CYLINDER BLOCK
MATERIAL
AlSi10Mg
PARAMETER
Prime (60µm)
BUILD TIME
66.5h
02
PART RENDER — 360° TURNTABLE — 1:1
EXHAUST DIFFUSER FOR MICROJET ENGINE
MATERIAL
IN718
PARAMETER
Prime (60µm)
BUILD TIME
27h
03
PART RENDER — 360° TURNTABLE — 1:1
HEAT EXCHANGERS
MATERIAL
AlSi10Mg
PARAMETER
Prime (60µm)
BUILD TIME
32.5h
07FILMS

NINE FILMS. EVERY NOT GOOD ENOUGH.

LAUNCH FILM

In the nine weeks before launch we published one film a week on how MACHX was built, with the engineers who built it — the reasoning behind every decision, including the ones we turned down. All nine are here.

01 — 10 · EPISODES
08THE ENGINEERS

WHY WE BUILT IT THIS WAY

From the engineers who made the decisions.

01 / 03
The most productive machine is not necessarily the one with the highest build rate. It is the one that produces the most parts, in the least space, at the lowest total cost.
Benjamin Haas · EMEA Marketing Lead, Product & Strategy
02 / 03
Most companies build up to a flagship. We started there.
Benjamin Haas · EMEA Marketing Lead, Product & Strategy
03 / 03
We cannot break the laws of physics. We can stop leaving performance on the table.
Simon Merkt-Schippers · EVP Product Management
09CONTACT SALES

SEE WHAT IT DOES WITH YOUR PART.

Send us a component and our application engineers will tell you what MACHX changes about building it — cost per part, build time, and what it means at production volume.